Malco Epic® Ascend Ceramic Coating

Epic® Ascend Ceramic Coating is Malco's professional-grade ceramic coating. It bonds with the clear coat to deliver outstanding hydrophobic and oleophobic performance, abrasion resistance, enhanced UV protection, and deep gloss. Dirt, water spots, and contaminants slide right off. Safe on painted surfaces, glass, and plastic trim. One layer is enough, and the enhanced working time makes it one of the easiest coatings to apply.

• Helps protect the vehicle surface for 4 years / 48,000 miles when professionally installed — the warranty requires an EPIC® certified installer and warranty registration
• Outstanding hydrophobic and oleophobic properties
• Abrasion resistance and enhanced UV protection
• 30 mL kit, Malco part 109380

Professional application recommended. Wash with CW-37™, clay, and machine polish with the EPIC® system, then prep with EPIC® Final Prep Wipe (#1097). Apply only in a covered, dust-free garage at 50 to 75°F, wearing gloves: 6 to 8 drops on the suede applicator for the first panel, then 4 to 6, worked in a crosshatch over 20 x 20 in. sections. The coating flashes in 30 to 90 seconds; remove with a clean microfiber. Keep the vehicle inside and dry for 12 hours, keep it dry for 24 hours, and allow up to 7 days for a full bond.

Highly flammable liquid and vapor; read the SDS before use.

WARNING: This product can expose you to 1-chloro-4-(trifluoromethyl)benzene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Contact High Limit Detail Supply® for professional application guidance and volume pricing.